Woodwind Care & Maintenance
AAA Band Rentals, LLC is dedicated to helping our customers realize their greatest musical potential. For trouble-free performance and the protection of your investment, we have put together this special care guide for your instrument. For the best use of your instrument, it is important that you give careful attention to the following recommendations.
Holding the top of the body (not the keys), attach the head-joint to the body. Do not push the head-joint all the way in. Leave about a quarter-inch of room. Line up the embouchure hole with the center of the keys. Still holding the top of the body, attach the foot to the body with a gentle, twisting motion. Be very careful not to bend or twist the keys. The tenons work by friction and you should not use lubrication of any kind. If you are having trouble connecting them, use rubbing alcohol and a soft cloth to clean. The embouchure hole should center with the C key and the D post on the foot and the D tone hole on the body.
Cleaning and maintenance
Sterilize the lip plate. Occasionally, check the head cork placement by using your tuning/cleaning rod, which should be centered in the embouchure hole. Do not try to adjust the cork yourself. To clean the flute body, insert the corner of a lint-free cloth through the small hole at the top of the cleaning rod. Key oil can be used once a month or so, but be careful and use a small amount to avoid getting any on the pads.
Attach the bell to the bottom joint. If you have a low Bb key, hold it closed while assembling the joints. Line up the posts so that the bridge keys will close the Bb. Assemble the upper and lower joints, holding the top of the upper joint and the bottom of the lower joint. Align the main key posts rather than the bridge keys to assemble cork joints, gently twist the two parts until they come together. Hold the upper joint, avoiding any keys, and insert the reed all the way
Attach the bell to the lower joint. Attach the upper joint to the lower joint. Be careful not to put pressure on any keys. While holding the top of the upper joint, attach the barrel to it by twisting gently. Attach the mouthpiece to the barrel. Attach the reed and ligature to the mouthpiece.
Cleaning the Body and Pads
Move the swab through each joint and the barrel to remove all moisture. Tenons collect moisture, especially at the upper and lower joints, so moisture should be removed with gauze. When drying a pad, insert cleaning paper between it and the tone hole and lightly press down. Then, carefully pull the paper away. Use a tone hole cleaner to remove the build-up of residue in the tone holes.
Hold onto the bell and neck when assembling the saxophone. Be careful not to bend any of the keys. When attaching or adjusting the mouthpiece, hold onto the neck. This will help you avoid bending the neck.
Never leave the neck strap attached to your sax when you put it in the case. The use of a tenon plug is essential for the safety of the octave mechanism. Accidental bending of the octave key is the most common damage to saxophones and will cause your horn to not respond correctly.
General Woodwind Care Tips
No gum or soft drinks before playing. Sugar mixed with saliva builds up on the pads and causes them to stick, making it difficult to play the instrument. Use cork grease as little as possible, but make sure you use it when needed. To apply it properly, you must rub the grease into the cork. Do not use ChapStick®. So moisture does not absorb into the pads, use an absorbent drop swab to clean out the moisture from each section before you place it in the case. Wipe down the exterior of the instrument with a non-treated cloth to remove fingerprints and residue. Do not store the reed on the mouthpiece; store in a reed holder. Reeds can cement themselves to your mouthpiece and collect many germs. As soon as the reed cracks, chips, or softens, it is time to replace it. Clean your clarinet or saxophone mouthpiece in warm, soapy water, making sure the reed and ligature have been removed. Do not leave a woodwind instrument in a hot car, or in your trunk. Extreme temperatures can damage your instrument. Do not set anything on top of your woodwind instrument, whether inside or outside of its case; this includes sheet music! Damage occurs easily when items are set on the instrument and the case is closed. The keys are often bent this way. Make sure the case is closed securely. Check all hinges, latches, and handles to ensure they are securely fastened. Never use pliers or hammers on your instrument. Improper use of household tools is a common cause of unnecessary damage to instruments. It is recommended that an instrument is taken to a professional repair technician at least once a year for general maintenance and cleaning. Doing so may prevent costly repairs that may eventually arise. A qualified technician can often discover a problem that you may have overlooked or may not be aware of.
Woodwind instruments should have the moisture removed from the bore after every playing. Pulling a swab through the bore of a clarinet removes the moisture that can accumulate and possibly cause cracking. Moisture should also be removed from the exterior of the instrument as well. Wipe the outside of the body using a soft cloth. Also, wipe the keys to remove any residue that could result in tarnishing.
There is much debate at this time as to whether a wood body of a clarinet should be oiled. Some experts in the field (including manufacturers) suggest oiling the bore with a fine bore oil to maintain resistance against moisture absorption. Others say the wood will only absorb a slight - amount of oil (on the surface) creating an imbalance between the surface and the wood below. This would create stress resulting in body cracking. If you do decide to oil, use a minimum on a soft cloth. The cloth should not be dripping wet, just damp. Avoid oil on the pads and corks.
Sticky pads can sometimes be adjusted by dragging a soft cloth between the pad and tone-hole surface. Place the cloth between the pad and tone-hole, then lightly close the pad against the cloth. Pull the cloth out being careful not to apply too much pressure which could cause the skin of the pad to tear. We generally do not recommend the use of powders which are supposed to dry the moisture on the pad. The powder doesn't work any better than the cloth and usually ends up in the key mechanisms causing the keys to be sluggish. If the cloth doesn't work after several tries, the pad should be replaced.
Key mechanisms need to be checked periodically for loose screws. Grasp the key and gently try to move side to side. If there is play, tighten the pivot screw until the key has a minimal amount of movement. If you tighten too much, the key will lock up. Loosen the screw slightly until the key moves again. Rods need to be tightened for proper seating of the pads. Check for rods that are extending beyond the post and tighten if necessary.
Oiling of the key mechanisms is essential for proper key operation. Any of the fine key oils available from the major manufacturers will work (or sewing machine oil is acceptable). A drop on the end of a needle pin is plenty for each key that contacts a post, either where a rod goes through a key, or where a key is held with a pivot screw. Oil the keys once every year. Too much oil and it will run over the keys, eventually removing the key corks. Not enough and the keys will dry out causing the keys to be sluggish.